DC INDUSTRIAL MOTOR SICME RA SERIES – 225 FRAME 400V 208KW @ 1505 RPM

Description

Sicme Motori RA Series Industrial DC Motor Frame Size 225

Typical specification is 400V 208.0kW @ 1505 RPM, other winding options available in table below. Please select which winding you require on the winding option dropdown when ordering your motor.

400V
Winding	RPM	P [kW]	V	I [A]	T [Nm]	η [%]	R arm (Ohm)	L arm (mH)
225 NS E	1672	233	400	635	1331	91.1%	0.0289	0.80
225 NS F	1505	208	400	570	1320	90.6%	0.0355	0.98
225 NS H	1322	182	400	500	1315	89.9%	0.0455	1.24
225 KS E	1586	241	400	660	1451	90.79%	0.0331	0.28
225 KS F	1429	218	400	600	1457	90.41%	0.0391	0.33
225 NM E	1480	233	400	635	1503	90.8%	0.0313	0.81
225 NM F	1332	208	400	570	1491	90.3%	0.0384	1.10
225 KM C	1717	295	400	800	1641	91.72%	0.0229	0.20
225 KM E	1403	240	400	660	1634	90.46%	0.0356	0.31
225 NL C	1615	284	400	770	1679	91.4%	0.0234	0.87
225 NL E	1327	232	400	635	1670	90.5%	0.0338	0.81
225 KL B	1709	314	400	850	1755	91.75%	0.0211	0.18
225 KL C	1538	294	400	800	1826	91.39%	0.0249	0.22
225 KL E	1257	240	400	660	1823	90.09%	0.0382	0.34
225 KP B	1520	313	400	850	1967	91.49%	0.0228	0.2
225 KP C	1369	294	400	800	2051	91.15%	0.0265	0.24
225 KX B	1345	312	400	850	2215	91.17%	0.0248	0.22

Many other kWs, frames and speeds available, see our Sicme RA Series DC Motor selection help for more detail, please contact us if you have a requirement that is not listed.

Sicme RA Series Industrial DC Motors can be used in industries and applications such as:
Cable transport
Machine tools
Sheet metal working machines
Plastic extruders
Blow moulding machines
Presses
Amusement rides
Woven wire manufacturing machines
Thread/cable manufacturing machines
Converting
Steel/copper cable working machines
Board working machines

All Sicme RA Series Industrial DC motors are suitable for either clockwise or counter-clockwise rotation without adjustment (as the brushes are radial), and they are generally tuned in the Test Room for this operating condition. In special cases, when the direction of rotation is defined, upon request, Test Room tuning can be carried out for one direction only.

IEC 60034-1 Standards
Fully laminated frame
Insulation class F
2 pole
Standard (non compensated winding).
Balancing A degree (ISO2373) with half key
Monolitic brush
Constant pressure brush-holders
Terminal box on top
Vacuum Pressure Impregnation
Standard arrangement uses ball bearings on both DE and NDE, grease lubricated for “life”, totally shielded on both sides (2Z type).
The standard mounting solution is IM 1001 mounting form (B3 according to UNEL 05513). Most of the forms of construction and mounting are available. For other forms of construction, please ask our sales. A second shaft end is also available on request.

It is assumed that the environment is:
dry, i.e. with relative humidity of the air below 75%. However, an excessively dry atmosphere (below 20% relative humidity) can cause commutating difficulty (excessive brush wear).
clean, i.e. without appreciable quantities of dust and dirt in general, suspended in the air.
free of chemical agents, i.e. without concentrations of gas or vapours that could chemically harm the copper, iron, aluminium,paints and insulation.

Sicme RA Series Industrial DC motors can also be installed in difficult environments (damp, dusty, chemically harmful, etc.) but in this case the degree of protection, method of cooling and possibly the choice of materials must be agreed upon prior to ordering.

All Sicme RA Series Industrial DC motors may be installed in environments with temperature down to –15°C and stored in environments with temperature down to –30°C.