INDUSTRIAL DC MOTOR SICME RA SERIES – 200 FRAME 440V 161.0KW @ 1521 RPM

Description

Sicme Motori RA Series Industrial DC Motor Frame Size 200

Typical specification is 440V 161.0kW @ 1521 RPM, other winding options available in table below. Please select which winding you require on the winding option dropdown when ordering your motor.

440V
Winding	RPM	P [kW]	V	I [A]	T [Nm]	η [%]	R arm (Ohm)	L arm (mH)
200 NS M	1871	109.0	440	262	556	89.34%	0.1084	2.35
200 NS P	1370	81.0	440	210	564	87.42%	0.1762	3.10
200 KS M	1682	103.0	440	262	585	88.725%	0.1159	1.02
200 KS P	1264	81.0	440	210	612	86.39%	0.1966	1.31
200 NM G	1870	144.0	440	360	735	90.30%	0.0677	1.50
200 NM L	1529	115.0	440	292	718	88.80%	0.1038	2.50
200 NM M	1400	103.0	440	262	703	88.09%	0.1255	2.95
200 KM G	1735	143.0	440	360	787	89.39%	0.0771	0.75
200 KM L	1424	115.0	440	292	771	88.41%	0.1123	0.97
200 KM M	1319	102.0	440	262	739	87.73%	0.1345	1.29
200 NL F	1720	162.0	440	405	899	90.00%	0.0618	1.41
200 NL G	1457	143.0	440	360	937	89.21%	0.0797	1.90
200 KL E	1747	177.0	440	444	968	90.06%	0.0565	0.56
200 KL F	1596	160.0	440	405	963	89.58%	0.0673	0.61
200 KL G	1351	142.0	440	360	1004	88.59%	0.0898	0.95
200 NX E	1665	178.0	440	444	1021	90.21%	0.0547	1.41
200 NX F	1521	161.0	440	405	1011	89.47%	0.0673	1.58
200 NX G	1287	142.0	440	360	1054	88.57%	0.0868	2.10
200 KX D	1711	197.0	440	491	1100	90.37%	0.0488	0.46
200 KX E	1545	177.0	440	444	1094	89.66%	0.0613	0.63
200 KX F	1410	160.0	440	405	1084	89.14%	0.0729	0.69
200 NY D	1640	197.0	440	491	1147	90.25%	0.0501	1.45
200 NY E	1491	177.0	440	444	1134	89.79%	0.0592	1.55
200 NY F	1361	161.0	440	405	1130	88.99%	0.0728	1.75
200 KY C	1723	213.0	440	535	1181	89.67%	0.0496	0.47
200 KY D	1533	196.0	440	491	1221	89.84%	0.0526	0.51
200 KY E	1383	176.0	440	444	1215	89.14%	0.0661	0.70

Many other kWs, frames and speeds available, see our Sicme RA Series DC Motor selection help for more detail, please contact us if you have a requirement that is not listed.

Sicme RA Series Industrial DC Motors can be used in industries and applications such as:
Cable transport
Machine tools
Sheet metal working machines
Plastic extruders
Blow moulding machines
Presses
Amusement rides
Woven wire manufacturing machines
Thread/cable manufacturing machines
Converting
Steel/copper cable working machines
Board working machines

All Sicme RA Series Industrial DC motors are suitable for either clockwise or counter-clockwise rotation without adjustment (as the brushes are radial), and they are generally tuned in the Test Room for this operating condition. In special cases, when the direction of rotation is defined, upon request, Test Room tuning can be carried out for one direction only.

IEC 60034-1 Standards
Fully laminated frame
Insulation class F
2 pole
Standard (non compensated winding).
Balancing A degree (ISO2373) with half key
Monolitic brush
Constant pressure brush-holders
Terminal box on top
Vacuum Pressure Impregnation
Standard arrangement uses ball bearings on both DE and NDE, grease lubricated for “life”, totally shielded on both sides (2Z type).
The standard mounting solution is IM 1001 mounting form (B3 according to UNEL 05513). Most of the forms of construction and mounting are available. For other forms of construction, please ask our sales. A second shaft end is also available on request.

It is assumed that the environment is:
dry, i.e. with relative humidity of the air below 75%. However, an excessively dry atmosphere (below 20% relative humidity) can cause commutating difficulty (excessive brush wear).
clean, i.e. without appreciable quantities of dust and dirt in general, suspended in the air.
free of chemical agents, i.e. without concentrations of gas or vapours that could chemically harm the copper, iron, aluminium,paints and insulation.

Sicme RA Series Industrial DC motors can also be installed in difficult environments (damp, dusty, chemically harmful, etc.) but in this case the degree of protection, method of cooling and possibly the choice of materials must be agreed upon prior to ordering.

All Sicme RA Series Industrial DC motors may be installed in environments with temperature down to –15°C and stored in environments with temperature down to –30°C.