SICME MOTORI RA SERIES DC MOTOR – 80 FRAME 440V 2.1KW @ 1570 RPM
Availability: Approx 8 working weeks.
£1,596.27 Plus VAT and Shipping
Sicme Motori RA Series Industrial DC Motor Frame Size 80, 440V, 2.1kW @ 1570 RPM, also available in other sizes. IC06 Cooling
Available on back-order
Sicme Motori RA Series Industrial DC Motor Frame Size 80
Typical specification is 440V 2.1kW @ 1570 RPM, other winding options available in table below. Please select which winding you require on the winding option dropdown when ordering your motor.
|Winding||RPM||P [kW]||V||I [A]||T [Nm]||η [%]||Armature|
|L [mH]||R 115°|
|80 NM S||1780||2.4||440||7.7||13.9||75%||65||9.9|
|80 NM T||1570||2.1||440||6.6||12.8||72.7%||79||13|
|80 NP O||1820||3.5||440||10.1||18.4||79.2%||40||6|
|80 NP P||1640||3.1||440||9.1||18.1||78%||48||7.3|
|80 NP Q||1410||2.7||440||8||18.3||76.1||62||9.4|
|80 NS U||1850||2.1||440||6.6||10.8||71.4%||77||13.2|
|80 NS V||1670||1.9||440||6.1||10.9||69.6%||90||16|
Many other kWs, frames and speeds available, see our Sicme RA Series DC Motors selection guide for more detail, please contact us if you have a requirement that is not listed.
RA Series motors can be used in:
Sheet metal working machines
Blow moulding machines
Woven wire manufacturing machines
Thread/cable manufacturing machines
Steel/copper cable working machines
Board working machines
All RA machines are suitable for either clockwise or counter-clockwise rotation without adjustment (as the brushes are radial), and they are generally tuned in the Test Room for this operating condition. In special cases, when the direction of rotation is defined, upon request, Test Room tuning can be carried out for one direction only.
IEC 60034-1 Standards
Fully laminated frame
Insulation class F
Standard (non compensated winding).
Balancing A degree (ISO2373) with half key
Constant pressure brush-holders
Terminal box on top
Vacuum Pressure Impregnation
Standard arrangement uses ball bearings on both DE and NDE, grease lubricated for “life”, totally shielded on both sides (2Z type).
The standard mounting solution is IM 1001 mounting form (B3 according to UNEL 05513). Most of the forms of construction and mounting are available. For other forms of construction, please ask our sales. A second shaft end is also available on request.
It is assumed that the environment is:
dry, i.e. with relative humidity of the air below 75%. However, an excessively dry atmosphere (below 20% relative humidity) can cause commutating difficulty (excessive brush wear).
clean, i.e. without appreciable quantities of dust and dirt in general, suspended in the air.
free of chemical agents, i.e. without concentrations of gas or vapours that could chemically harm the copper, iron, aluminium,paints and insulation.
Sicme RA Series DC motors can also be installed in difficult environments (damp, dusty, chemically harmful, etc.) but in this case the degree of protection, method of cooling and possibly the choice of materials must be agreed upon prior to ordering.
All RA Series motors may be installed in environments with temperature down to –15°C and stored in environments with temperature down to –30°C.