SICME MOTORI RA SERIES DC MOTOR – 180 FRAME 400V 69.7KW @ 1510 RPM

Availability: Approx 8 working weeks.

£4,837.50 Plus VAT and Shipping

Sicme Motori RA Series Industrial DC Motor Frame Size 180, 400V, 69.7kW @ 1510 RPM, also available in other sizes. IC06 Cooling

Available on back-order

Ventilation Options

(Winding) Power and Speed Options

Provision for Tachogenerators and Encoders

Mechanical Variation

Ventilation

Bearings

Image may be representative.

Description

Sicme Motori RA Series Industrial DC Motor Frame Size 180

Typical specification is 400V 69.7kW @ 1510 RPM, other winding options available in table below. Please select which winding you require on the winding option dropdown when ordering your motor.

400V
Winding RPM P [kW] V I [A] T [Nm] η [%] Armature
L [mH] R 115°
180 KS D 2070 93.4 400 260 431 89.7% 0.66 0.114
180 KS E 1680 78 400 221 443 88.3% 1.09 0.166
180 KS F 1510 69.7 400 200 441 87.3% 1.17 0.206
180 KS G 1310 60.7 400 177 442 85.9% 1.7 0.277
180 KM C 1840 102 400 284 529 90.0% 0.77 0.107
180 KM D 1660 92.1 400 257 530 89.5% 0.81 0.128
180 KM E 1340 76.4 400 218 544 87.6% 1.35 0.186
180 KL B 1910 112 400 310 560 90.4% 2.9 0.085
180 KL C 1540 100 400 280 620 89.5% 0.91 0.019
180 KL D 1380 90 400 254 623 88.5% 0.97 0.142
180 KL E 1310 79.5 400 228 580 87.1% 5.68 0.161
180 KP B 1660 111 400 309 639 90.1% 3.32 0.092
180 KP C 1330 98.8 400 277 709 89.1 1.05 0.129

Many other kWs, frames and speeds available, see our Sicme RA Series DC Motor selection help for more detail, please contact us if you have a requirement that is not listed.

RA Series motors can be used in:
Cable transport
Machine tools
Sheet metal working machines
Plastic extruders
Blow moulding machines
Presses
Amusement rides
Woven wire manufacturing machines
Thread/cable manufacturing machines
Converting
Steel/copper cable working machines
Board working machines

All RA machines are suitable for either clockwise or counter-clockwise rotation without adjustment (as the brushes are radial), and they are generally tuned in the Test Room for this operating condition. In special cases, when the direction of rotation is defined, upon request, Test Room tuning can be carried out for one direction only.

IEC 60034-1 Standards
Fully laminated frame
Insulation class F
2 pole
Standard (non compensated winding).
Balancing A degree (ISO2373) with half key
Monolitic brush
Constant pressure brush-holders
Terminal box on top
Vacuum Pressure Impregnation
Standard arrangement uses ball bearings on both DE and NDE, grease lubricated for “life”, totally shielded on both sides (2Z type).
The standard mounting solution is IM 1001 mounting form (B3 according to UNEL 05513). Most of the forms of construction and mounting are available. For other forms of construction, please ask our sales. A second shaft end is also available on request.

It is assumed that the environment is:
dry, i.e. with relative humidity of the air below 75%. However, an excessively dry atmosphere (below 20% relative humidity) can cause commutating difficulty (excessive brush wear).
clean, i.e. without appreciable quantities of dust and dirt in general, suspended in the air.
free of chemical agents, i.e. without concentrations of gas or vapours that could chemically harm the copper, iron, aluminium,paints and insulation.

Sicme RA Series DC motors can also be installed in difficult environments (damp, dusty, chemically harmful, etc.) but in this case the degree of protection, method of cooling and possibly the choice of materials must be agreed upon prior to ordering.

All RA Series motors may be installed in environments with temperature down to –15°C and stored in environments with temperature down to –30°C.

Sicme Motori RA Series DC Motor 180 Frame Dimensions
Sicme Motori RA Series DC Motor 180 Frame Dimensions
Summary
product image
Aggregate Rating
no rating based on 0 votes
Manufacturer
Sicme Motori
Product Name
RA 180 Series DC Motor
Price
GBP 7141.89
Product Availability
Pre-Order Only