Availability: Approx 8 working weeks£2,182.24 Plus VAT and Shipping

Sicme Motori RA Series Industrial DC Motor Frame Size 100, 440V, 5.8kW @ 1470 RPM, also available in other sizes. IC06 Cooling

Available on back-order

Ventilation Options

(Winding) Power and Speed Options

Provision for Tachogenerators and Encoders

Mechanical Variation



Image may be representative.


Sicme Motori RA Series Industrial DC Motor Frame Size 100 

Typical specification is 400V 5.8kW @ 1470 RPM, other winding options available in table below. Please select which winding you require on the winding option dropdown when ordering your motor.

Winding RPM P [kW] V I [A] T [Nm] η [%] Armature
L [mH] R 115°
100 NM M 1820 7.0 400 21.3 36.7 82.2 23 2.6
100 NM O 1470 5.8 400 18.1 37.7 80 34 3.5
100 NM Q 1210 4.6 400 15.1 36.3 76.4 46 5.1
100 NP H 1970 10.8 400 31.5 52.4 85.6% 13.8 1.4
100 NP I 1770 9.5 400 28.4 51.3 83.6% 17 1.7
100 NP J 1600 8.5 400 25.8 50.7 82.3% 20 2.1
100 NP K 1450 7.9 400 24.2 52.0 81.8% 23 2.4
100 NP M 1220 6.6 400 20.7 51.7 79.9% 31 3.2

Many other kWs, frames and speeds available, see our Sicme RA Series DC Motor selection help for more detail, please contact us if you have a requirement that is not listed.

RA Series motors can be used in:
Cable transport
Machine tools
Sheet metal working machines
Plastic extruders
Blow moulding machines
Amusement rides
Woven wire manufacturing machines
Thread/cable manufacturing machines
Steel/copper cable working machines
Board working machines

All RA machines are suitable for either clockwise or counter-clockwise rotation without adjustment (as the brushes are radial), and they are generally tuned in the Test Room for this operating condition. In special cases, when the direction of rotation is defined, upon request, Test Room tuning can be carried out for one direction only.

IEC 60034-1 Standards
Fully laminated frame
Insulation class F
2 pole
Standard (non compensated winding).
Balancing A degree (ISO2373) with half key
Monolitic brush
Constant pressure brush-holders
Terminal box on top
Vacuum Pressure Impregnation
Standard arrangement uses ball bearings on both DE and NDE, grease lubricated for “life”, totally shielded on both sides (2Z type).
The standard mounting solution is IM 1001 mounting form (B3 according to UNEL 05513). Most of the forms of construction and mounting are available. For other forms of construction, please ask our sales. A second shaft end is also available on request.

It is assumed that the environment is:
dry, i.e. with relative humidity of the air below 75%. However, an excessively dry atmosphere (below 20% relative humidity) can cause commutating difficulty (excessive brush wear).
clean, i.e. without appreciable quantities of dust and dirt in general, suspended in the air.
free of chemical agents, i.e. without concentrations of gas or vapours that could chemically harm the copper, iron, aluminium,paints and insulation.

Sicme RA Series DC motors can also be installed in difficult environments (damp, dusty, chemically harmful, etc.) but in this case the degree of protection, method of cooling and possibly the choice of materials must be agreed upon prior to ordering.

All RA Series motors may be installed in environments with temperature down to –15°C and stored in environments with temperature down to –30°C.

Sicme Motori RA Series DC Motor Frame 100 Dimensions
Sicme Motori RA Series DC Motor Frame 100 Dimensions
product image
Aggregate Rating
no rating based on 0 votes
Sicme Motori
Product Name
RA 100 Series DC Motor
GBP 2182.24
Product Availability
Pre-Order Only