SICME MOTORI MQ SERIES Asynchronous Vectorial AC Motor MQ355P 1088kW @ 1500rpm IP 23

Availability: Approx 8 working weeks.

£63,724.54 Plus VAT and Shipping

Sicme Motori MQ Series Asynchronous Vectorial Square Frame AC Motor Frame Size 355, 400V, 1088kW @ 1500 RPM, available in other sizes/speeds/powers. IC06 Cooling.

Available on back-order

(Winding) Power and Speed Options

Terminal Box Location

Provision for Tachogenerators and Encoders


Image may be representative.


Sicme Motori MQ Series Industrial Square Frame AC Motor - Frame Size 355P

Typical specification is 1088kW @ 1500rpm with a 3x400V Inverter Supply. Other winding options available in table below. Please select which winding you require on the winding option dropdown when ordering your motor.

3 x 400V Inverter Supply 
Winding Nominal Speed


Nominal Power P


Nominal Torque Maximum Torque Inertia Nominal Voltage Nominal Current Nominal freq.


Max Speed

(Nominal mechanical power at the shaft for service factor S1)

Max Speed

(Maximum mechanical speed not in continuous duty)

355 P F2 500 394 7534 14500 36,5 400 725 25 1000 2200
355 P E3 750 580 7388 14500 36,5 400 1074 37,5 1500 2200
355 P D1 1000 766 7314 14500 36,5 400 1344 50 2000 2200
355 P D3 1250 938 7168 14500 36,5 400 1647 62,5 2200 2200
355 P C2 1500 1088 6931 14500 36,5 400 1918 75 2200 2200
355 P B1 1800 1243 6598 14500 36,5 400 2205 90 2200 2200

The values of frequencies in BLUE are indicative only.

Many other kWs, frames and speeds available, see our Sicme MQ Series AC Motor Selection help for more detail, please contact us if you have a requirement that is not listed.

Sicme MQ Series AC motors can be used in:

Cable transport
Sheet metal working machines
Machine tools
Plastic extruders
Blowing machines
Woven wire manufacturing machines
Industrial washing machines
Amusement rides
Thread/cable manufacturing machines
Steel/copper cable working machines
Board working machines

The asynchronous motors MQ series have been specially engineered to achieve reduced dimensions, high performances in variable speed applications with flux vector type controllers. They were born due the great experience of two important companies in the field of industrial automation: Magnetic Motors & SicmeMotori.

The main feature is in the laminated stator pack which carries out the functions of the frame and integrates the air circulation system. In particular, these motors, even though they are sensibly more compact, make it possible to achieve very high specific powers with regard to a standard motor with the same shaft height. The distinctive electromagnetic and mechanical design permits operation in constant power mode at maximum speeds of up to 8000 RPM. The efficient stator cooling system uses an auxiliary electrofan to combine the benefits of reduced dimensions and high, continuous, low-speed torque capability.

They are three-phases asynchronous motors with squirrel-cage, low losses laminated sheet with square frame visible from external of motor, a compact structure independent electrofan to obtain the following characteristics:

- High power with relation to the external size
- Small external dimensions
- High rotation speed (up to 8000 rpm)
- Maximum and continuous torque are available even at low speed
- Small moment of inertia of the rotor
- Degrees of protection IP54 and IP23
- Dimensional and power comparability with direct current motors.
- Ventilation and speed transducer incorporated in the motor structure
- High mechanical robustness
- High precision of rotation speed
- Insulation class F (CEI EN60034-1)

They are available with 10 different shaft height (frame size 100-132-160-180-225-280-355-400-450-500 mm) with power ranging from 2,5 to 3600kW. In addition the MQ motors can also be manufactured with larger shaft height sizes on customer’s request.

Standard mechanical protection degree available are: closed solution in IP 54 and an open solution in IP 23. Other solutions are available upon request.

The cooling of the motor is provided by an axial or radial electric fan, mounted in the rear of the motor (no drive end side of coupling).

It is assumed that the environment is:
dry, i.e. with relative humidity of the air below 75%. However, an excessively dry atmosphere (below 20% relative humidity) can cause commutating difficulty (excessive brush wear).
clean, i.e. without appreciable quantities of dust and dirt in general, suspended in the air.
free of chemical agents, i.e. without concentrations of gas or vapours that could chemically harm the copper, iron, aluminium,paints and insulation.

Sicme MQ Series AC motors can also be installed in difficult environments (damp, dusty, chemically harmful, etc.) but in this case the degree of protection, method of cooling and possibly the choice of materials must be agreed upon prior to ordering.

All MQ Series motors may be installed in environments with temperature down to –15°C and stored in environments with temperature down to –30°C.

Cooling - Frame Sizes 355, IP 23

A centrifugal fan is mounted radially to the motor.  Compliant to IC06

MQ Series Asyncronous Vectorial AC Motor Dimensions - 355 Frame - IP 23

MQ Series Asyncronous Vectorial AC Motor Dimensions - 355 Frame - IP 23

Frame Size A B D E F GA L LB WW ZZ
MQ355 S 610 808 Ø 120m6 210 32 127 1720 1510 609 M24
MQ355 M 610 908 Ø 120m6 210 32 127 1820 1610 709 M24
MQ355 L 610 1008 Ø 120m6 210 32 127 1920 1710 809 M24
MQ355 P 610 1108 Ø 120m6 210 32 127 2020 1810 909 M24

Flange Dimensions refer to B35 version.

Drives and Automation Ltd are the sole UK agent for the Sicme Motori range of high quality AC and DC motors, and have been supplying them to UK industry for many years.

product image
Aggregate Rating
no rating based on 0 votes
Sicme Motori
Product Name
MQ Series 355 Frame Asynchronous Vectorial AC Square Frame Motor
GBP 63724.54
Product Availability
Pre-Order Only